1080P WDR Vehicle Front View Camera
CH307FE front view camera supports 1080P HD resolution and WDR image processing technology, which can present clear and stable images even in poor lighting conditions.
| Specification | |
|---|---|
| Waterproof Level | Inside Mounting, Non-Waterproof |
| Night Vision | Yes, Built-in Light Sensor |
| Image Sensor | SONY CCD |
| Resolution | HD 1080P |
| Features | WDR (Wide Dynamic Range) |
| Power Supply | DC12V |
| View angle | 120° In Diagonal |
| TV System | PAL or NTSC (Standard Is With PAL System) |
| Microphone | Standard Is Without Audio |
| Connection Plug(Connector) | Aviation 4PIN Female |
| Material Of Housing | Plastic |
DETAIL INFORMATION
HD Front view camera bracket install
1. Insert the T-shaped base onto the down cover of the rectangle-loop.
2. Tear the sticker of the T-shaped base and rectangle loop, and stick it onto a suitable installation place.
3. Insert CH307FE(Front facing starlight night vision camera module) into T-shaped base.
4. Place the CH307FE wire harness along the down cover of the rectangle-loop.
Note: When feeding the wire through the rectangle loop, make sure it follows the designated channel as this will prevent the cover from fitting correctly and may cause damage to the wire.
5. Once the wire is correctly fitted click into place the finishing cover.
6. Try to adjust to a suitable view angle by pushing the regulating stem.
7. Make the slot of the strip bar align with the module, and stick it firmly.
8. Place the wire harness of CH307FE into the slot of the strip bar.
9. Click to place the strip bar into its slot.
10. Assembling finished.
Attention: Recording to actual car model, it is able to adjust the length of the shell of the strip bar or tailor the shell of the strip bar and at the cutting position.
Make inquire to aotop TEAM
We'd like to work with you!
Send us a message if you have any questions or request a quote. Our experts will give you a reply within 24 hours and help you select the right valve you want.
